autompicker1035

Machines and accessories
for concrete technology

S.r.l.

Via Seneca, 3
Tel. ++39 0434630197

33089 Villotta di Chions (Pn)
Fax ++39 0434630527

Italy

1035

The 1035 is a CE marked machine for automatically picking up concrete products produced in a vibrating mould machine.

It is fully automatic and self-propelled on steel wheels with an "adiprene" rubber layer. It only requires the operator to enter the program and possibly insert the pallet, this operation to be performed only with the specific device delivered with the machine. In fact, the machine's program allows it to work with or without a pallet.
The front part of the machine is provided with introduction guides that allow it to follow a row of concrete products even if they are not perfectly aligned.

Having both a block valve and an hydraulic accumulator, the machine allows for fine pressure adjustments that remain constant

over time, allowing it to pick up weak or not fully cured concrete products.

Concrete products are picked up by mechanical arms furnished with rubber sleeves whose pressure is adjusted with a manual valve.
The EPROM that controls the machine allows the operator to select different types of packaging of the desired dimension with simple digital input to the pre-installed programs . The operator need only select the type of packaging and whether it is with or without a pallet.

The EPROM also has a self-test subroutine capable of detecting functional anomalies.

The machine can pick up the entire daily production of a vibrating-mould machine in half a day.

Important features

ü a fixed frame;

ü a driving unit with gear motor and differential gear for advancement;

ü a hydraulic unit for jack movement;

ü an electronic automation system (EPROM) to manage the production phases;

ü an electrical main board with control unit in low tension;

ü grids, protection bonnets and front bar for obstacle sensing, connected with the machine's protection circuit through safety switches with forced breaking of contact normally opened.

Technical futures

ü Package dimensions

Ø Length
1,00
m

Ø Width
1,00
m

Ø Height
1,20
m

ü Steering diameter
4,5
m

ü Drive speed
13
m/min

ü Total installed power
6,9
kW

ü Total absorbed power
4,2
kW

ü Total weight
2.600
kg

ü Total volume
11,53
m³

ü Transport dimensions

Ø Length
3,10
m

Ø Width
1,55
m

Ø Height
2,40
m

For futher information, please contact us, we will be glad to give you all explanations that you need.

S.r.l.
Via Seneca, 3		Tel. ++39 0434630197
33089 Villotta di Chions (Pn)		Fax ++39 0434630527
Italy

The 1035 is a CE marked machine for automatically picking up concrete products produced in a vibrating mould machine. It is fully automatic and self-propelled on steel wheels with an "adiprene" rubber layer. It only requires the operator to enter the program and possibly insert the pallet, this operation to be performed only with the specific device delivered with the machine. In fact, the machine's program allows it to work with or without a pallet. The front part of the machine is provided with introduction guides that allow it to follow a row of concrete products even if they are not perfectly aligned. Having both a block valve and an hydraulic accumulator, the machine allows for fine pressure adjustments that remain constant


over time, allowing it to pick up weak or not fully cured concrete products. Concrete products are picked up by mechanical arms furnished with rubber sleeves whose pressure is adjusted with a manual valve. The EPROM that controls the machine allows the operator to select different types of packaging of the desired dimension with simple digital input to the pre-installed programs . The operator need only select the type of packaging and whether it is with or without a pallet. The EPROM also has a self-test subroutine capable of detecting functional anomalies. The machine can pick up the entire daily production of a vibrating-mould machine in half a day.

ü	a fixed frame;
ü	a driving unit with gear motor and differential gear for advancement;
ü	a hydraulic unit for jack movement;
ü	an electronic automation system (EPROM) to manage the production phases;
ü	an electrical main board with control unit in low tension;
ü	grids, protection bonnets and front bar for obstacle sensing, connected with the machine's protection circuit through safety switches with forced breaking of contact normally opened.

ü	Package dimensions
	Ø Length	1,00	m
	Ø Width	1,00	m
	Ø Height	1,20	m
ü	Steering diameter	4,5	m
ü	Drive speed	13	m/min
ü	Total installed power	6,9	kW
ü	Total absorbed power	4,2	kW
ü	Total weight	2.600	kg
ü	Total volume	11,53	m³
ü	Transport dimensions
	Ø Length	3,10	m
	Ø Width	1,55	m
	Ø Height	2,40	m