blockmakingmachine1015

Machinery and accessories
for concrete technology

S.r.l.

Via Seneca, 3
Tel. ++39 0434630197

33089 Villotta di Chions (Pn)
Fax ++39 0434630527

Italy

1015

The vibrating mould machinery 1015 is a CE marked machine for forming concrete products with a fixed height 200 or 250 mm.

It is fully automatic and self-propelled on steel wheels covered with an "adiprene" rubber layer, and works on a steel plate. This solution is superior to working directly on the track because working on steel plate gives the product both a finer finish and greater strength and avoids product sticking to the track.

Since the machine can be advanced at twice the working speed, rapid changes of position can be accomplished during the movement and transfer along the track.

Moulds can be installed for concrete products with a fixed height of 200 or 250 mm and products can only be formed on steel plate.

Click on the pictures for more details

Important features

ü a hopper for concrete dosing, with two sensors: one inside to check for the presence of concrete, one outside for checking the quantity of material to be stored in the feeder;

ü a mobile feeder for mould filling with a grid with alternating, symmetrical movement;

ü a sliding steel plate to support the products during the forming phase;

ü six mechanical vibrators, with adjustable rotating weights, driven by means of electrical motors, four on the outside of the mould and two on the upper part of the pressing stripper;

ü a stripper/ back draft to press and shake-out the concrete products;

ü a fixed steel frame;

ü a drive unit with gear motor for advancement;

ü a drive unit with gear motor for translation;

ü a hydraulic unit for single and double effect jack movement with cooling circuit with air/oil exchanger and thermostat;

ü an electromechanical-hydraulic automation system with cams to manage the production phases;

ü an electrical main board;

ü a driving board, in low tension (24 V AC), mounted on a traversing arm easily accessible from the driving platform;

ü grids, protection bonnets and front bar for obstacle sensing, connected to the machine's protection circuit through safety switches with forced breaking of contact normally opened.

Technical futures

ü Hopper capacity
1.245
l

ü Vibrator power
6 x 2,3
kW

ü Hydraulic unit power
11
kW

ü Tank capacity
100
l

ü Shake-out dimensions

Ø Length
1.070
mm

Ø Width
1.050
mm

Ø Height
200 o 250
mm

ü Medium operating cycle time
40
s

ü Steering diameter
8,5
m

ü Drive speed
17
m/min

ü Total installed power
31,1
kW

ü Total absorbed power
19,8
kW

ü Total weight without mould
5.450
kg

ü Total volume without mould
16,95
m³

ü Transport dimensions

Ø Length
3,10
m

Ø Width
2,17
m

Ø Height
2,52
m

Contact us for more information and we will be happy to provide answers for all your questions.

S.r.l.
Via Seneca, 3		Tel. ++39 0434630197
33089 Villotta di Chions (Pn)		Fax ++39 0434630527
Italy

The vibrating mould machinery 1015 is a CE marked machine for forming concrete products with a fixed height 200 or 250 mm. It is fully automatic and self-propelled on steel wheels covered with an "adiprene" rubber layer, and works on a steel plate. This solution is superior to working directly on the track because working on steel plate gives the product both a finer finish and greater strength and avoids product sticking to the track.


Since the machine can be advanced at twice the working speed, rapid changes of position can be accomplished during the movement and transfer along the track. Moulds can be installed for concrete products with a fixed height of 200 or 250 mm and products can only be formed on steel plate.

ü	a hopper for concrete dosing, with two sensors: one inside to check for the presence of concrete, one outside for checking the quantity of material to be stored in the feeder;
ü	a mobile feeder for mould filling with a grid with alternating, symmetrical movement;
ü	a sliding steel plate to support the products during the forming phase;
ü	six mechanical vibrators, with adjustable rotating weights, driven by means of electrical motors, four on the outside of the mould and two on the upper part of the pressing stripper;
ü	a stripper/ back draft to press and shake-out the concrete products;
ü	a fixed steel frame;
ü	a drive unit with gear motor for advancement;
ü	a drive unit with gear motor for translation;
ü	a hydraulic unit for single and double effect jack movement with cooling circuit with air/oil exchanger and thermostat;
ü	an electromechanical-hydraulic automation system with cams to manage the production phases;
ü	an electrical main board;
ü	a driving board, in low tension (24 V AC), mounted on a traversing arm easily accessible from the driving platform;
ü	grids, protection bonnets and front bar for obstacle sensing, connected to the machine's protection circuit through safety switches with forced breaking of contact normally opened.

ü	Hopper capacity	1.245	l
ü	Vibrator power	6 x 2,3	kW
ü	Hydraulic unit power	11	kW
ü	Tank capacity	100	l
ü	Shake-out dimensions
	Ø Length	1.070	mm
	Ø Width	1.050	mm
	Ø Height	200 o 250	mm
ü	Medium operating cycle time	40	s
ü	Steering diameter	8,5	m
ü	Drive speed	17	m/min
ü	Total installed power	31,1	kW
ü	Total absorbed power	19,8	kW
ü	Total weight without mould	5.450	kg
ü	Total volume without mould	16,95	m³
ü	Transport dimensions
	Ø Length	3,10	m
	Ø Width	2,17	m
	Ø Height	2,52	m